Name | Color | |
2 X Pneumatic Hose Connector with Axle Connector | Dark Bluish Gray |   | |
1 X Technic, Axle Connector 2L (Smooth with x Hole + Orientation) | Light Bluish Gray |   | |
5 X Technic, Pin 1/2 | Light Bluish Gray |   | |
8 X Technic, Axle 3 with Stop | Reddish Brown |   | |
4 X Technic, Axle 5 with Stop | Reddish Brown |   | |
1 X Technic, Pin with Friction Ridges Lengthwise WITH Center Slots | Black |   | |
4 X Technic, Liftarm 1 x 4 Thin | Black |   | |
2 X Technic, Axle and Pin Connector Angled #3 - 157.5 degrees | Black |   | |
8 X Technic, Axle and Pin Connector Perpendicular Double | Black |   | |
4 X Technic, Liftarm 1 x 2 Thin | Black |   | |
6 X Technic, Axle Pin with Friction Ridges Lengthwise | Blue |   | |
1 X Technic, Axle 2 Notched | Red |   | |
1 X Minifigure, Weapon Lightsaber Hilt Straight | Metallic Silver |   | |
2 X Plate, Round 1 x 1 Straight Side | Pearl Dark Gray |   | |
2 X Minifigure, Weapon Gun, Blaster Short (SW) | Pearl Dark Gray |   | |
2 X Plate, Round 1 x 1 Straight Side | Flat Silver |   | |
2 X Tile, Modified 1 x 2 Grille with Bottom Groove / Lip | Flat Silver |   | |
1 X Plate, Modified 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs | Flat Silver |   | |
2 X Plate 2 x 2 | Dark Bluish Gray |   | |
1 X Plate 1 x 6 | Dark Bluish Gray |   | |
1 X Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends | Dark Bluish Gray |   | |
2 X Tile, Modified 1 x 2 with Handle | Dark Bluish Gray |   | |
2 X Slope, Curved 2 x 2 Lip, No Studs | Dark Bluish Gray |   | |
2 X Plate, Modified 1 x 2 with Clip Horizontal on End | Dark Bluish Gray |   | |
6 X Plate 2 x 4 | Dark Bluish Gray |   | |
1 X Hinge Brick 1 x 2 Top | Dark Bluish Gray |   | |
4 X Plate, Modified 1 x 1 with Clip Vertical - Type 4 (thick open O clip) | Dark Bluish Gray |   | |
1 X Plate 3 x 3 | Dark Bluish Gray |   | |
4 X Tile, Modified 1 x 1 with Clip - Rounded Edges | Dark Bluish Gray |   | |
5 X Plate, Modified 1 x 2 with Handle on End - Closed Ends | Dark Bluish Gray |   | |
4 X Bar Holder with Clip | Dark Bluish Gray |   | |
2 X Hinge Plate 3 x 4 Locking Dual 2 Finger | Dark Bluish Gray |   | |
1 X Plate, Modified 8 x 8 with Grille and Hole in Center | Dark Bluish Gray |   | |
1 X Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove | Dark Bluish Gray |   | |
5 X Plate 1 x 4 | Dark Bluish Gray |   | |
2 X Brick 2 x 4 | Dark Bluish Gray |   | |
2 X Plate, Modified 1 x 2 with Handle on Side - Closed Ends | Dark Bluish Gray |   | |
2 X Tile, Modified 2 x 3 with 2 Clips (thick open O clips) | Dark Bluish Gray |   | |
6 X Plate, Modified 1 x 2 Rounded with 2 Open Studs | Dark Bluish Gray |   | |
2 X Wedge 4 x 4 Triple Inverted with Connections between Studs | Dark Bluish Gray |   | |
1 X Slope, Curved 4 x 2 No Studs | Dark Bluish Gray |   | |
7 X Slope, Curved 2 x 1 No Studs | Dark Bluish Gray |   | |
2 X Wedge, Plate 2 x 2 Cut Corner | Dark Bluish Gray |   | |
1 X Bracket 1 x 2 - 1 x 2 Inverted | Dark Bluish Gray |   | |
2 X Minifigure, Weapon Trigger for Gun, Mini Blaster / Shooter | Dark Bluish Gray |   | |
2 X Tile, Modified 2 x 2 Triangular | Light Bluish Gray |   | |
2 X Wedge, Plate 2 x 2 Left | Light Bluish Gray |   | |
2 X Minifigure, Utensil Ingot / Bar | Light Bluish Gray |   | |
4 X Brick, Round Corner 10 x 10 with Slope 33 Edge, Axle Hole, Facet Cutout | Light Bluish Gray |   | |
2 X Wedge 2 x 1 with Stud Notch Right | Light Bluish Gray |   | |
4 X Bar 4L (Lightsaber Blade / Wand) | Light Bluish Gray |   | |
1 X Plate, Modified 1 x 1 with Clip Horizontal (thick open O clip) | Light Bluish Gray |   | |
1 X Hinge Brick 1 x 2 Base | Light Bluish Gray |   | |
1 X Slope 33 3 x 2 | Light Bluish Gray |   | |
2 X Slope, Inverted 45 2 x 1 | Light Bluish Gray |   | |
1 X Slope 18 4 x 1 | Light Bluish Gray |   | |
2 X Plate, Modified 1 x 2 with Clips Horizontal (thick open O clips) | Light Bluish Gray |   | |
1 X Tile, Round 2 x 2 with Open Stud | Light Bluish Gray |   | |
2 X Wedge 2 x 1 with Stud Notch Left | Light Bluish Gray |   | |
3 X Plate 2 x 3 | Light Bluish Gray |   | |
4 X Slope, Curved 2 x 2 Inverted | Light Bluish Gray |   | |
6 X Slope, Curved 2 x 1 Inverted | Light Bluish Gray |   | |
1 X Tile 1 x 4 | Light Bluish Gray |   | |
4 X Cylinder Hemisphere 3 x 3 Ball Turret | Light Bluish Gray |   | |
8 X Technic, Pin 1/2 with 2L Bar Extension (Flick Missile) | Light Bluish Gray |   | |
1 X Wedge, Plate 4 x 2 Left | Light Bluish Gray |   | |
2 X Hinge Brick 1 x 2 Top | Light Bluish Gray |   | |
1 X Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove | Light Bluish Gray |   | |
2 X Tile, Modified 2 x 2 Inverted | Light Bluish Gray |   | |
2 X Wedge, Plate 3 x 3 Cut Corner | Light Bluish Gray |   | |
2 X Wedge, Plate 6 x 6 Cut Corner | Light Bluish Gray |   | |
2 X Plate 4 x 4 | Light Bluish Gray |   | |
2 X Slope, Curved 4 x 1 No Studs | Light Bluish Gray |   | |
1 X Wedge, Plate 4 x 2 Right | Light Bluish Gray |   | |
4 X Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side | Light Bluish Gray |   | |
2 X Cylinder Hemisphere 2 x 2 Ball Turret Socket Base | Light Bluish Gray |   | |
1 X Tile 1 x 3 | Light Bluish Gray |   | |
2 X Brick, Round Corner 6 x 6 with Slope 33 Edge, Facet Cutout | Light Bluish Gray |   | |
1 X Tile 1 x 2 with Groove | Light Bluish Gray |   | |
2 X Hinge Plate 1 x 4 Locking Dual 1 Fingers on Side | Light Bluish Gray |   | |
2 X Technic, Brick 1 x 2 with Holes | Light Bluish Gray |   | |
2 X Bracket 1 x 2 - 2 x 2 Inverted | Light Bluish Gray |   | |
1 X Bracket 3 x 2 x 1 1/3 | Light Bluish Gray |   | |
6 X Plate, Modified 1 x 2 with Door Rail | Light Bluish Gray |   | |
2 X Wedge, Plate 2 x 2 Right | Light Bluish Gray |   | |
1 X Plate 2 x 10 | Light Bluish Gray |   | |
3 X Bar 6L with Stop Ring | Light Bluish Gray |   | |
2 X Wedge 6 x 4 Triple Inverted with Connections between Studs | Light Bluish Gray |   | |
1 X Brick, Round 2 x 2 with Flutes (Grille) and Axle Hole | Light Bluish Gray |   | |
1 X Minifigure, Weapon Gun, Pirate Flintlock Musket | Reddish Brown |   | |
2 X Tile, Round 1 x 1 | Dark Blue |   | |
2 X Slope, Curved 2 x 2 No Studs | Dark Blue |   | |
5 X Plate 1 x 2 | Dark Blue |   | |
4 X Tile, Modified 2 x 2 with Studs on Edge | Dark Blue |   | |
4 X Slope, Curved 3 x 1 No Studs | Dark Blue |   | |
2 X Plate 2 x 4 | Dark Blue |   | |
2 X Ice Cream Cone | Dark Blue |   | |
1 X Wedge, Plate 3 x 6 Cut Corners | Dark Blue |   | |
8 X Plate 2 x 3 | Dark Blue |   | |
1 X Wedge, Plate 2 x 2 Right | Dark Blue |   | |
6 X Slope, Curved 4 x 2 No Studs | Dark Blue |   | |
1 X Wedge, Plate 2 x 2 Left | Dark Blue |   | |
1 X Plate 2 x 8 | Dark Blue |   | |
4 X Brick, Round Corner 5 x 5 x 1 without Studs | Dark Blue |   | |
2 X Brick, Round Corner 6 x 6 with Slope 33 Edge, Facet Cutout | Dark Blue |   | |
4 X Brick, Round 2 x 2 with Axle Hole | Dark Blue |   | |
2 X Wedge, Plate 2 x 2 Cut Corner | Dark Blue |   | |
3 X Slope, Curved 4 x 1 Double No Studs | Dark Blue |   | |
2 X Plate 1 x 1 | Dark Blue |   | |
4 X Plate, Round Corner 4 x 4 | Dark Blue |   | |
4 X Plate, Round 4 x 4 with 2 x 2 Hole | Dark Blue |   | |
2 X Slope, Curved 4 x 1 Inverted | Dark Blue |   | |
1 X Human Tool, Brick and Axle Separator | Orange |   | |
1 X Bracket 1 x 1 - 1 x 1 | Medium Blue |   | |
4 X Plate, Round 1 x 1 Straight Side | Trans-Red |   | |
1 X Plate 4 x 12 | Green |   | |
2 X Bracket 1 x 2 - 1 x 4 with Rounded Corners | Black |   | |
4 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | Black |   | |
4 X Plate, Modified 1 x 2 with Clip Horizontal on End | Black |   | |
2 X Bracket 1 x 2 - 2 x 2 Inverted | Black |   | |
2 X Plate, Modified 1 x 2 with Mini Blaster / Shooter | Black |   | |
2 X Bar 1L with 1 x 1 Round Plate with Hollow Stud | Black |   | |
4 X Plate, Round 2 x 2 with Axle Hole | Black |   | |
8 X Plate, Round 1 x 1 with Open Stud | Black |   | |
8 X Plate, Modified 1 x 2 with Pin Hole on Bottom | Black |   | |
6 X Bracket 5 x 2 x 1 1/3 with 2 Holes | Black |   | |
2 X Brick 2 x 6 | Black |   | |
4 X Brick 1 x 8 | Blue |   | |
1 X Brick 1 x 2 | Yellow |   | |
2 X Plate, Modified 1 x 1 Rounded with Handle | Black |   | |
1 X Brick 2 x 8 | Tan |   | |
2 X Wedge, Plate 2 x 2 Cut Corner | Red |   | |
1 X Plate 1 x 3 | Tan |   | |
2 X Plate, Round 1 x 1 Straight Side | Tan |   | |
1 X Technic, Brick 1 x 2 with Holes | Tan |   | |
3 X Brick 1 x 4 | Tan |   | |
2 X Plate, Modified 1 x 2 with Mini Blaster / Shooter with Dark Bluish Gray Trigger (15403 / 15392) | Black |   | |
1 X Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove | Light Bluish Gray |   | |
8 X Bar with Light Cover / Bionicle Barraki Eye | Trans-Red |   | |
1 X Bar 4L (Lightsaber Blade / Wand) | Trans-Bright Green |   | |
1 X Hinge Brick 1 x 2 Base with Dark Bluish Gray Hinge Brick 1 x 2 Top (3937 / 3938) | Light Bluish Gray |   | |
1 X Sticker for Set 75233 - (48300/6252977) | (Not Applicable) |   | |
1 X Plate, Round 1 x 1 Straight Side | Tan |   | |
1 X Minifigure, Weapon Lightsaber Hilt Straight | Metallic Silver |   | |
1 X Tile, Round 1 x 1 | Dark Blue |   | |
1 X Technic, Pin with Friction Ridges Lengthwise WITH Center Slots | Black |   | |
1 X Technic, Pin 1/2 | Light Bluish Gray |   | |
1 X Bar 1L with 1 x 1 Round Plate with Hollow Stud | Black |   | |
1 X Plate, Round 1 x 1 Straight Side | Pearl Dark Gray |   | |
1 X Plate 1 x 1 | Dark Blue |   | |
1 X Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side | Light Bluish Gray |   | |
1 X Arm Mechanical, Straight with Clips at 90 degrees (Vertical Grip) | Tan |   | |
1 X Arm Mechanical, Battle Droid | Tan |   | |
1 X Bar with Light Cover / Bionicle Barraki Eye | Trans-Red |   | |
1 X Plate, Round 1 x 1 Straight Side | Trans-Red |   | |
1 X Minifigure, Weapon Trigger for Gun, Mini Blaster / Shooter | Dark Bluish Gray |   | |
1 X Plate, Round 1 x 1 with Open Stud | Black |   | |
1 X Plate, Round 1 x 1 Straight Side | Flat Silver |   | |
1 X Brick, Round Corner 6 x 6 with Slope 33 Edge, Facet Cutout with SW Hull Plates, Yellow Ado Eemon Emblem Model Left Side Pattern (Sticker) - Set 75233 | Light Bluish Gray |   | |
1 X Brick, Round Corner 6 x 6 with Slope 33 Edge, Facet Cutout with SW Hull Plates, Yellow Ado Eemon Emblem Model Right Side Pattern (Sticker) - Set 75233 | Light Bluish Gray |   | |
1 X Brick, Round Corner 10 x 10 with Slope 33 Edge, Axle Hole, Facet Cutout with SW Dark Blue Stripes Pattern Model Left Side (Sticker) - Set 75233 | Light Bluish Gray |   | |
1 X Brick, Round Corner 10 x 10 with Slope 33 Edge, Axle Hole, Facet Cutout with SW Dark Blue Stripes Pattern Model Right Side (Sticker) - Set 75233 | Light Bluish Gray |   | |
1 X Brick, Round Corner 10 x 10 with Slope 33 Edge, Axle Hole, Facet Cutout with SW Outlet Nozzles Pattern Model Left Side (Sticker) - Set 75233 | Light Bluish Gray |   | |
1 X Brick, Round Corner 10 x 10 with Slope 33 Edge, Axle Hole, Facet Cutout with SW Outlet Nozzles Pattern Model Right Side (Sticker) - Set 75233 | Light Bluish Gray |   | |
1 X Slope, Curved 2 x 1 No Studs with SW Droid Gunship Hull Plate and Peeling Paint Pattern (Sticker) - Set 75233 | Dark Bluish Gray |   | |
2 X Slope, Curved 4 x 2 No Studs with SW Droid Gunship Vents Pattern (Sticker) - Set 75233 | Dark Blue |   | |
Отзывы о наборе LEGO 75233